Bruce Roberts-Goodson EMAIL   HOME PAGE BUILD "BETTER FOR LESS" WITH BRUCE ROBERTS BOAT PLANS SEE - WHAT'S NEW ! Illustrated Custom Boatbuilding. We recommend that you read  this hardcover book - Order now LATEST NEWS  FROM OTHER BUILDERS      HOME / INDEX PAGE   SAILBOAT DESIGNS   POWERBOAT DESIGNS

 

BRUCE ROBERTS YACHT DESIGN

EUROPE . USA . AUSTRALIA

EMAIL: boatdesigns@gmail.com

WEB: WWW.BRUCEROBERTS.COM

BOAT-OWNER, MAINTENANCE & SURVEY PLANS !

These complete plans cost a fraction of what the original plans cost the builder and have MUCH MORE UP TO DATE INFORMATION than was included in the ORIGINAL PLANS.!

THESE PLANS CONTAIN EXTRA INFORMATION ON ELECTRICAL INSTALATIONS, PLUMBING, RIGGING & MAST PLANS FOR RIGGING YOUR BOAT PLUS CONSTRUCTION AND FITTING OUT OF YOUR BOAT, INFORMATION THAT WAS NOT AVAILABLE WITH THE ORIGINAL PLANS.

You can order these plans for YOUR boat by going to our SPECIALS PAGE and clicking on the €195.oo BUY NOW button and following the directions for payment. https://www.bruceroberts.com/public/HTML/SPECIAL.htm

As soon as we see your payment we will send you the complete plans by DOWNLOAD to your computer.

The ‘BOAT OWNER’ PLANS cover all aspects of MAINTAINING your boat when it is completed.

BOAT OWNER PLANS:
You will receive the latest updated version of the plans for YOUR boat. These plans show how your boat should be built, you can COMPARE the structure of your boat against the plans to make sure all is correct. If any modifications are needed you will be able to make any corrections using these plans.

Below is listed a complete set of plans to enable you to complete your boat

1A.  All sail plans ( Sailboats ) plus these sheets cover the boats general arrangement drawings, profile and plan views of the hull, the deck and superstructure plus the deck plan.  In the case of sailboats, the sail plan, rigging plan and all measurements are included on these sheets.

Sheet 1AA. (There may be several sheets covering various versions of the same design). Boat Accommodation laid out and all measurements are shown in plan and profile views. The several versions of the one design are shown on separate sheets. Also included is a list for all the materials used to build the hull deck and superstructure of your boat.

Sheet 2. Boat Lines plan, show hull sections, profile including all water and buttock lines, plan view including all water lines and buttock lines. All frame spacing, stern or transom detail keel measurements, rudder and skeg should all be included and all dimensions are clearly shown.

Sheet 3. This sheet will be a reduced drawing, representing what you can expect to see, when the builder laid out the full size boat hull frame patterns.

Sheet 4. On this sheet you are shown how the frames were manufactured and assembled, plus the forming of the stem and other parts of the basic framework. The above forms and shows the shape of your hull.

Sheet 5. This sheet will show the installation of the stringers and deck shelf plus installing the plating in metal boats. In the case of radius chine boats additional information is supplied on installing these plates.  Compare the sizes of all of the structure of your boat and that it matches the measurements as shown in the plans.

Sheet 6. This sheet covers the inside of the hull, and shows the installation of the floor webs, bulkheads, engine beds, and all interior stiffeners for your boat.

Sheet 7. This sheet may show detail of the various items not covered in sheet 6. Often it takes two or more sheets to cover webs, bulkheads.

Sheet 8. This is the engineering sheet that covers the engine installation, locating and building the fuel and water tanks plus making the rudder. Also included are details on making the stern and rudder tubes plus propeller shaft detail. Stanchions swim platforms and similar items may also be on this sheet.

Sheet 9. This sheet shows details the forming and installation of deck beams, side decks, foredeck, aft deck, cockpit construction and all deck framing detail of your boat design.

Sheet 10. Patterning and making the cabin sides cabin front etc. In the case of the cabin sides the measurements should be adequate to enable you to make up a plywood pattern and trial fit before cutting the actual cabin side plates.

Sheet 11. This sheet covers such items as, deck fittings, additional rudder construction etc.

Sheet 12.  Electrical schematics.

Sheet 13.  Plumbing schematics.

 Sheet 14.  Exhaust systems.

Sheet 15.  Fuel and Water tank construction.

 Sheet 15.  Anode sizes and placement.

Also is included  1,800 Page e-book “BOATBUILDING” with STEP by STEP building instructions and PHOTOGRAPHS to show you how your boat was built.

The price of the plans includes as much consultation with the designer as YOU feel necessary to help you successfully complete the project....the offer 'CALL BRUCE ANYTIME' is not made lightly. You can CALL or EMAIL BRUCE ANYTIME for advice on your boat building project.

Order your BOAT OWNER PLANS today. Click on the €195.oo BUY NOW button and following the directions for payment.

https://www.bruceroberts.com/public/HTML/SPECIAL.htm

Looking forward to hearing from you,

BRUCE Roberts-Goodson

Chief Designer and CEO

Bruce Roberts Yacht Design