|
| Already over 250 of this
design have been completed and are in service world-wide. The boat plans
and frame patterns are easy to follow and you can build this boat in
FIBERGLASS, STEEL or ALUMINUM.
It has a full displacement, semi-displacement or planing hull and can be
built as a family cruiser or as a rugged work boat. The chine hull has provided an
excellent overall hull shape and plating has been calculated to provide easy construction
with minimum wastage.
This design was prepared for operators in the North
Sea and therefore the boat had to a rugged and safe sea boat. The full displacement hull
makes for economical operation and has been designed to operate around the 7 to 8 kt
cruising speed range with a 60 hp engine.
Amateurs with welding experience should have no
problems building this vessel in STEEL or ALUMINUM using the full size frame patterns which come with the
boat plans, and the straight forward, step by step instructions.
If you choose FIBERGLASS construction then virtually anyone with the very
minimum of hands on DIY experience can ( and already have) built this boat. |
|
SUPER
STUDY BOAT PLANS ...
Delivered by DOWNLOAD to your computer within 12 hours of you placing your order.
The study plans have lists of
materials & equipment etc & these will be useful in
costing out the complete boat.
Each STUDY PLAN contains ALL the construction
drawings for each material - STEEL, ALUMINUM, FIBERGLASS
as applicable to the particular boat plan - with up to 25 sheets per plan! Lists
of materials - Technical information - Numerous
construction drawings are all included. You
can view & print the drawings in full or in sections.
BUILDING PHOTOS are included in the study plan package.
PLUS you receive a FREE
( VALUE £69.00 )
e-book
BUILD YOUR OWN POWER BOAT
STUDY
PLAN COASTWORKER 30 £59.95 -
€82 - $92
|
|
SPECIAL INTRODUCTORY OFFER:
COMPLETE BOAT PLANS & FULL SIZE FRAME PATTERNS
...
Delivered by DOWNLOAD to your computer within 12 hours of you placing your order.
The plans have
all the information you need to build your own boat..
Each plan contains all the construction
drawings for
STEEL OR
ALUMINUM
or FIBERGLASS
construction, plus bonus drawings covering
electrical, plumbing and engineering, everything you need to build your
boat. Plus you will receive a DETAIL FOLIO showing how to make many of your
own boat fittings, lists
of materials and equipment are all included plus all technical information,
numerous
construction drawings and written building instructions are all included. You
can view & print the drawings in full or in sections.
BUILDING PHOTOS are included in the plan package.
PLUS you receive a FREE
( VALUE £69.00 )
e-book
BUILD YOUR OWN POWER BOAT
..
Only available at this price if you order off this page
.... COMPLETE PLANS & PATTERNS CW30
£295 - $445
- €395
|
| L.O.A. |
9.20 m |
30' 0" |
| L.W.L. |
8.20 m |
27'-0" |
| BEAM |
3.40 m |
11' 0" |
| DRAFT |
1.20 cm |
3' 9" |
| POWER |
85 hp - 220 hp |
| SPEEDS |
20 to 25 kt |
|
|
COASTWORKER
30
Fisherman / Workboat
You can customize the lay-out of this boat to suit
your own requirements...You could extend the pilot house etc. |
|
New Coastworker 30 -
family version.
 |
COASTWORKER
30
FAMILY VERSION
The boat plans for the CW 30 now include a family
version as shown above and on left. You have a choice between a V drive or
stern drive installation - or if you modify the interior lay-out to
suit, you could have a conventional drive with the engine box in the
salon - could double as table.
|
|
|
COASTWORKER
30
Fisherman / Workboat
Stern drive version built by David Wren
|
|
 |
COASTWORKER
30
Fisherman / Workboat
Hi, My name is Bob Fuller from Little Hampton West Sussex in the
UK. Got to say your boat plans were a doddle to
understand and fabrication.
We
finished the boat recently and everyone who has looked at it agrees that
whilst remaining practical it is one of the prettiest looking
charter/trawler boats around as discussed with you previously we intend to
market the boat and continue to use your hull design as our base, adding
our own features and that of our future clients. |
|
 |
COASTWORKER
30
Fisherman / Workboat
You can see what we have achieved
using your boat plans and our skills. I hope this is of interest to you regards Bob
Fuller
SEE MANY MORE PHOTOS OF THIS BOAT IN THE
STUDY PLAN
PACKAGE. |
|
 |
COASTWORKER
30
Fisherman / Workboat
Owner cut down aft section for easy handling of gear - nice idea |
|
 |
COASTWORKER
30
Fisherman / Workboat
Almost ready for trials. The clean lines of the Coastworker are apparent
in this photo. |
|
 |
COASTWORKER
30
Fisherman / Workboat
Ready for work ! |
|
 |
COASTWORKER
30
Fisherman / Workboat
Trials over! Another successful owner built boat using Bruce Roberts
boat plans and frame patterns.
|
 |
EURO 1200 -
COASTWORKER
40
Click here to see
Euro
Coastworker 40 STEEL OR ALUMINUM PLANS & CUTTING FILES |
| This Coastworker 30 is being built by Graham in Gympie, Queensland. Inside
has already all blasted and primed. When building upside down this is a good thing to have
done before turning. The deck can then be made from plates blasted and primed on one side
and then the entire outside can be done as one lot after all the welding is finished |
|
Stringers notched into frames.
Also shown in this shot is the skeg
that has been designed
to protect
the prop and rudder from damage.
Fully plated up bow section.
Be sure to only tack weld
plates until entire hull is plated |
Working first one side then the
other the hull plates are laid and
tacked onto the
stringers
Last plate waiting to be laid on |
Fully plated. Notice split pipe rubbing
strake, a good thing to incorporate
at this stage. |
Rolling the hull over. Plenty of old tires required here. Graham is now working on the engineering, deck and
superstructure. We hope to bring you more photos as he progresses towards launch day. |
|
![Bruce[2].jpg (4158 bytes)](../../images/Bruce[2].jpg)
