BRUCE ROBERTS YACHT DESIGN

Bruce Roberts-Goodson
EMAIL BRUCE


These sailboat plans feature simple & easy to follow STEP by STEP CONSTRUCTION for STEEL, ALUMINUM, FIBERGLASS & WOOD EPOXY building methods.  These sailboats can be built by any person with welding skills (Steel or Aluminum) or general handyman skills (Fiberglass or Wood Epoxy). 

 

NO previous boat building skills are needed ... all  you need is to follow the plans and you will be able to build a beautiful STEEL, ALUMINUM, FIBERGLASS & WOOD EPOXY sailboat for yourself and your family's happy days on the water.

 

1. ALL BOAT PLANS & FULL SIZE PATTERNS: Package Includes latest sail boat plans, SAILBOAT building plan updates & revisions, PLUS direct contact with the designer EMAIL BRUCE  & come with a BONUS PLANS - placement of anodes, how to build a sea hood, how to build fuel & water tanks, engine installation, electrical schematic & plumbing; all included to assist you to build your boat.  All the plans are sent by DOWNLOAD directly to your computer. The plans also include the 1,800 PAGE e-book BUILD YOUR OWN SAILBOAT


2. All BOAT PLANS & patterns come with a special DETAIL FOLIO on how to make some of your own fittings.  All BOAT PLANS are have both metric & imperial measurements.  All BOAT PLANS include FULL SIZE frame patterns at no extra charge.

 

3. Where FIBERGLASS is mentioned as a material this means Balsa sandwich / Foam sandwich, Single skin as the boat building material.  Most WOOD / EPOXY designs can be built using either molded ply or strip plank or a combination of the two methods. Many STEEL designs can be built in ALUMINUM; please seek the designers advice first.

 

4. We personally check the BOAT PLANS for updates to make sure you receive the latest version; we are constantly updating all of our BOAT PLANS.  PLUS you have direct contact with the designer Bruce Roberts-Goodson.  EMAIL BRUCE 

ROBERTS 15 ft DINGHY

BOAT PLANS & CUTTIING FILES FOR ALUMINUM or PLYWOOD

 

BOAT PLANS & CUTTING FILES

Length - 15 ft - 0 in...............4.58 m

Beam 6 ft - 2 in.....................1.88 m

Draft 3 ft - 6 in......................1.07 m

 

This versatile dinghy was designed to be built from ALUMINUM but I can see no reason why the parts especially the planking could not be cut from plywood.


 

259.00 - us$359.00 - 295.00

To order PLANS CUTTING FILES & go to SPECIALS PAGE and

 

 

click on  295.00  BUY NOW BUTTON

FOR FULL INFORMATION SEE THE STUDY PLANS