SPRAY 475  - ' Passage-making' Trawler.
PASSAGE MAKING TRAWLER SERIES:

The Spray is a well proven hull type suitable for both sail and power options. Over the past 30 years several Spray's have already been built as successful trawlers and fishing boats. The radius chine building technique is well proven and offers the added attraction of a beautiful round bilge hull and is an ideal hull form for offshore trawlers.  Combine the Spray with the radius chine building method and you have something special.  Here are a couple of examples of what we have in mind. The sailboats are available as all Steel KITS and the Trawler version has a combination a steel hull with aluminum superstructure.

SEE also  SPRAY 475 - A - Sailboat    SPRAY 475 - B - Sailboat     SPRAY 532 - Sailboat

SPRAY 475 TRAWLER  ... Built in Turkey... Latest email July 2008

Attached are the latest of KARA1.  I'm not sure whether they qualify for your e-book but they sure will qualify for the purpose she was built for. Thank you again on behalf of my friends. They appreciate every minute of their time spent on KARA1. They keep telling me '' THE BEST BOAT ON EARTH IS THE BOAT OF A FRIEND '' Best Regards Erhan KUM

The way the kit this boat is designed it is possible to loCATAMARANe the superstructure in several different locations - As you Erhan wanted a large aft deck area so he moved the pilot house and deck salon forward towards the bow.

LETTER FROM SPRAY TY 475 BUILDER THIS ONE IN TURKEY

Hi Bruce Yesterday we baptised KARA and set her free. Attached are just a few pics and the DOWNLOAD or on USB
- YOU CHOOSE DOWNLOAD OR USB
. . .
will follow. I just can not express the joy and happiness. Thank you.  Which address should I send the DOWNLOAD or on USB
- YOU CHOOSE DOWNLOAD OR USB
. . .
.   Erhan KUM

Hi BRUCE,

I am really sorry I could not inform you about the maiden voyage we made with KARA. On the 18th of May at 08:00 we took off from istanbul-Burgazada and headed to Sarkoy which is right accross tha Marmara and about 92 Nm.

We sailed with 2000 Rpm and averaged 9 Nm/hour. Second day as we went through the Dardanels and to the open sea ( Agean ) the weather and the seas got rough but who cares. She dances over the the first wave like a ballerina and having the 420 hps behind dives straight into the coming wave.

We have not dropped or broken any glassware all thorough the trip. The third and the fourth days were calm and we tested her on various aspects. The whole trip was 300 Nms and we clicked 37 engine ours and 800 litres of fuel. I think when everything gets into gear we will be able to sail her on 16 to 18 litres per hour with an 8 Nm. speed.

By the way under 2300 Rpms she registered 14.5 Nms ( About 11 knots which is the expected hull speed )  Right now we are still working on her and as she will be ready for sailing I will send you some interior pics as well. Attached are just some more pics of her and son.
Regards KUM

JULY 7th 2009

Dear Bruce, This is (Attached pictures) as close as I could get to KARA 1 this year. Right now I am in the middle of Asia, Almaty-Kazakhstan and working to cover her expenses. Hopefully I will get a break in October and enjoy the murmurs of the twin Cummins 210. Apart from my work schedule things are well, and KARA 1 is at good hands. She is in tip top condition and so far friends are enjoying short cruises.
No complaints whatsoever. Best Regards Erhan KUM

Profile view of the Spray 475 Passagemaking Trawler Yacht

Plan view of the deck and pilot house layout of the Spray 475 Passagemaking Trawler Yacht

Plan view of the below decks accommodation layout of the Spray 475 Passagemaking Trawler Yacht

The photo shows the bottom plates in position on the jig and the first few stringers webs and stringers are in place. This kit was supplied by Bruce Roberts and delivered to the builder in Seattle USA

ALL STUDY PLAN PACKAGES ON DOWNLOAD or on USB
GIVE ACCESS TO HUNDREDS OF BOAT & KIT ASSEMBLY PHOTOS